specification control drawing tyco electronics corporation 300 constitutional drive menlo park, ca 94025 usa title : soldersleeve, pcb connector, 2.16x0.51x6.35 (0.085x0.020x0.250) terminal unless otherwise specified dimensions are in millimeters. inches dimensions are in between brackets. document no.: d-129-03 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserv es the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. doc issue: 1 date: 08-feb.-01 drawn by: m. foronda cage code: 06090 replaces: n/a dcr number: d010033 prod. rev.: g scale: none size: a sheet: 1 of 1 if this document is printed it becomes unc ontrolled. check for the latest revision. materials 1. insulation sleeve: heat shrinkable, transparen t blue, radiation cross-linked polyvinylidene fluoride. 2. solder preform with flux: solder: type sn63 per ansi j-std-006. flux: type rol1 per ansi j-std-004. application 1. this part will terminate up to three 22 awg tin or silver plated wires. 2. sleeve will recover to 1.30 (0.051) max. i.d. 3. temperature rating: 150 c. 4. this drawing forms part of rayche m specification control drawing d-714-00.
|